Skip to main content

in this section

Spring 2014 Hooey Award Winners: Beth Savoy and Brian Koo

Thursday, May 29, 2014

Beth Savoy and Faculty Adviser, Fernando Escobedo

Beth Savoy of the Escobedo Research Group and Brian Koo of the Clancy Research Group were selected for the 2014 Spring Hooey Award. Each presented a special seminar on their research: 

Beth Savoy presented: A modeling study of local surface heterogeneities and their impact on wetting and adhesion behavior in dry and humid environments

Surfaces may appear to be flat and homogeneous by human observation, but upon closer inspection at sub-micron length scales they can reveal a rich and quite varied chemistry and topology which impart sometimes unexpected behaviors, as evidenced by the self-cleaning lotus leaf and insects which can walk on water.  There exist many theoretical equations which often provide reliable estimates of macroscopic properties such as surface energy, fluid contact angle, or individual forces contributing to adhesion between surfaces.  However, because many of these theories rely on assumptions about ideal geometry and chemical homogeneity, they may not accurately capture the details of wetting and adhesive behavior at sub-micron length scales.  For applications which rely on nanoscale features, such as micro-fluidics, chemically active laboratory or consumer product surfaces, or understanding how the aforementioned biological systems work, those local heterogeneities are key to understanding and manipulating interfacial behavior. 

By applying molecular dynamics simulations to ideal mesoscopic surfaces with features designed to prevent wetting, and atomistic amorphous surfaces in various environments, we studied interfacial behavior for systems of interest.  Using rare-event sampling techniques we quantified the thermodynamics and kinetics of the wetting transition to show that re-entrant roughness features can be constructed to increase the transition energy barrier for moderately phillic fluids, but as the intrinsic contact angle of that fluid decreases, representing a decrease in fluid surface tension, the chemistry quickly dominates the free energy landscape, resulting in full wetting of the idealized surface despite the topological transition energy barrier.  The wetting transition state is shown to depend on fluctuations in the fluid interface, a condition which is not considered in most macroscopic treatments.  At the atomistic level, we performed adhesion energy simulations on an amorphous glass surface in dry and humid conditions.  Our results indicate that the type of surface hydroxyl can impact how strongly the surface will adhere to another similar surface, depending on both potential of interaction and steric factors within the bulk.  Specifically, addition of B-hydroxyl groups reduces the adhesion between surfaces as compared to a pure silica surface.  Additionally, conditions of low relative humidity show lower adhesion than high humidity, as a liquid bridge is unable to form below about 10% RH.

Interfacial behavior of solid surfaces at the sub-micron scale is a result of complex interplay between local chemistry and topology, which change the functional response of those surfaces in ways that may not be predicted by macroscale equations.  Molecular simulations can elucidate the impact of local conditions and lead to methods for controlling surface performance.

Brian Koo presented: Computationally predicted ordered heterojunction architectures based on fullerene adsorption in phthalocyanine covalent organic frameworks

Compared to conventional silicon solar cells, organic solar cells offer advantages in weight, cost, and flexibility, making them deployable on curved surfaces, in large areas from roll to roll processing, and in mobile applications. The efficiency of organic solar cells has steadily improved due to combined experimental and computational efforts in the field. The architecture of the heterojunction, or the interface between hole-conducting and electron-conducting materials, is an integral aspect of organic solar cells that affects the efficiency of the device. We seek to integrate hole-conducting covalent organic frameworks (COFs) with electron-conducting fullerene molecules to assist in the fabrication and optimization of novel ordered-heterojunction architectures to explore potential efficiency gains. In fact, recently, a solar cell was made from a combination of PCBM (electron carrier) and a thienothiophene-based COF (hole carrier) but displayed a disappointingly low solar efficiency. We harness Molecular Dynamics, Monte Carlo, and Kinetic Monte Carlo techniques to study the construction as well as the filling mechanism of prototypical ordered heterojunction solar cells to understand the structural basis for this low efficiency. COFs are desirable materials since they transport free charge carriers perpendicular to their stacked layers, and their inherent ability to direct the structural characteristics of semiconducting guest molecules within its pores, such as fullerene. From the results of these studies we report qualitative descriptions of local order of fullerene within the pores and growth profiles of fullerene throughout the filling process.

back to listing